Stage 3 Correction

​​​Summary: 

This is our most advanced detail which can be completed in 3-5 days. Paintwork deep cleansed, clayed and a full set of paint thickness readings taken. A multi stage machine polish using a combination of compound, medium and ultra fine polishes is performed. The amount of extra machine polishing required to remove deep scratches will surprise many but in most cases we can achieve a 98% level of complete correction to the vehicle.


Process:

  • Wheels Cleaned including faces, inner barrels and behind the spokes
  • Citrus pre-wash to lower body, door shuts and sills
  • Wheel Arches cleaned and pressure rinsed
  • Snow Foam Pre-Wash applied to remove lose particles of dirt
  • Two bucket PH Neutral safe wash performed
  • Full decontamination of the body from Iron Fallout and Tar
  • Clay decontamination process performed to remove any further hidden contaminants
  • Final rinse completed and then plush towels used to dry the vehicle
  • Blow dry performed on the wheels and hard to reach areas to remove remaining water
  • Paint thickness readings are taken over all areas of the bodywork to map out how much paint we have to work with safely
  • Trim is masked to protect from damage or polish transfer during the machine polishing stage
  • First stage machine polish is performed using heavy cut compounds where deep scratches are on the paintwork
  • Bodywork is air blown to remove dust particles from the polishing
  • A Panel wipe is performed to remove any oils from the first polishing process
  • A Second stage medium cutting process is performed to remove medium scratches and defects from the rest of the body
  • Bodywork is then air blown to remove dust particles from the polishing
  • A Panel wipe is performed again to remove any oils from the second polishing process
  • Third and final stage machine polish is performed using fine compounds and pads to the bodywork and lights
  • Bodywork is then air blown for a final time to remove any remaining dust particles
  • Paintwork wiped down using Panel Wipe to ensure protective coatings form a perfect bond with your car’s paintwork.
  • Sealant applied to paintwork to add a layer of protection (upgrades are available to premium waxes or ceramic coatings)
  • Tyres and Trim dressed
  • Brightwork and Tailpipes polished and protected where necessary
  • Glass Cleaned and Sealed


Recommended for Vehicles:

That have unloved paintwork and where the highest level of correction is needed.


Duration: 3-5 Days

Price: Price On Application



Optional Extras:

  • Basic Interior Valet £20+  (Hoover to carpets, plastics cleaned and dressed)
  • Premium Interior Valet £60+ (Hoover to carpets, plastics cleaned and dressed, Wet Vac to carpets, Leather Cleaned and Condintioned)
  • Engine Bay Clean £30+
  • Convertible Fabric Roof Cleaning £30+
  • Wet Sanding £30 per small panel / £60 per large panel


Protection Upgrades: 

  • Convertible Roof Protection - Gtechniq Smart Fabric £60+
  • Alloy Wheels Ceramic Coated - Gtechniq C5 Wheel Armour - £60 (Facias) or £180 (Wheels removed and all areas of the wheel coated)
  • Glass sealant upgrade - Gtechniq G1 Clear Vision to all exterior glass - £60
  • Smart Fabric to interior - Floor Mats £20 / Seats £40
  • Premium Wax Upgrade - £60+
  • Gtechniq Ceramic Bodywork Coating upgrade - Gtechniq C1 £95+ or Gtechniq C1 and EXO £180+
  • Gtechniq Ceramic Bodywork Coating upgrade - Gtechniq Crystal Serum Light £185+ or Gtechniq Crystal Serum Light and EXO £250+
  • Gtechniq Ceramic Bodywork Coating upgrade - Gtechniq Crystal Serum Ultra £285+ or Gtechniq Crystal Serum and EXO £395+



Copyright ©  Petrolhead Detailing. All rights reserved.